by KH202312Q76JHC_admin | Aug 14, 2014 | build gallery
What model Shrike did you choose? Full size Shrike with keyhole cockpit. What modifications, if any, did you make to the design described in the Build Manual? 4mm BSS 1088 marine plywood throughout, rather than 3mm. 10.5″ lowered masik. Deck lowered by 10mm....
by KH202312Q76JHC_admin | Jul 29, 2014 | build gallery
What model Shrike did you choose? Full size Shrike with keyhole cockpit What modifications, if any, did you make to the design described in the Build Manual? I opted for the lower foredeck beam (masik) as for Shrike Too. Modified skeg wire system as described under...
by KH202312Q76JHC_admin | Jun 14, 2014 | build gallery
What model Shrike did you choose? This was the prototype for the rolling hybrid, based on the standard Shrike Hull and Shrike-Too masik. What modifications, if any, did you make to the design described in the Build Manual? These are documented now in the Shrike-R...
by KH202312Q76JHC_admin | May 6, 2014 | build gallery
What model Shrike did you choose? What modifications, if any, did you make to the design described in the Build Manual? The masik is at 11.5 inches, I lowered the bow to cut down on wind-age not much about 1.5 inches. I rounded the bow and stern. (people complain...
by KH202312Q76JHC_admin | May 2, 2014 | build gallery
What model Shrike did you choose? Skrike LV at 90% scale printed plans. What modifications, if any, did you make to the design described in the Build Manual? Slightly lengthened the 90% cockpit length. What is the weight of the finished kayak? 29 pounds. Anything you...
by KH202312Q76JHC_admin | Feb 27, 2014 | build gallery
What model Shrike did you choose? This was the prototype Shrike-Too derived from the original Shrike templates. What modifications, if any, did you make to the design described in the Build Manual? These are all included in the Shrike-Too build options in the...
