Build Gallery

Click on an image to learn more about each build.

Collin Manning from USA

What model Shrike did you choose? Shrike R What modifications, if any, did you make to the design described in the Build Manual? I raised the height of the foredeck 2 inches. What is the weight of the finished kayak? 27lbs Anything you wish you had done differently?...

Nick Crowhurst from UK

What model Shrike did you choose? Shrike What modifications, if any, did you make to the design described in the Build Manual? I added a knee tube to house a hand pump, Maroske deck fittings, and pre-bent laminated thigh braces as Peter M. designed. What is the weight...

Paul F. from UK

What model Shrike did you choose? Shrike What modifications, if any, did you make to the design described in the Build Manual? I fitted deck beams in a square layout around each of the hatches, including a forehatch What is the weight of the finished kayak? 16 kg...

Alistair from UK

What model Shrike did you choose? Shrike What modifications, if any, did you make to the design described in the Build Manual? For the deck line fittings I used small closed loops of tape so that the screws were hidden inside the loop. I changed the profile of the...

Philip Anderson from USA

What model Shrike did you choose? Shrike Too What modifications, if any, did you make to the design described in the Build Manual? Maroske deck fittings, carbon fiber keyhole cockpit. Beckson screw in deck hatches front rear " day hatch 6" Carbon fiber skeg with self...

Moshe Boneh from Isreal

What model Shrike did you choose? I build a shrike-lv (90%) and lower the deck 2 cm. What modifications, if any, did you make to the design described in the Build Manual? I made 2 Hatches, ocean cockpit 100% size and no skeg. What is the weight of the finished kayak?...

Peter from UK

What model Shrike did you choose? Shrike with 11” masik What modifications, if any, did you make to the design described in the Build Manual? Added Maroske deck fittings, a compass recess on the foredeck, and a Connect Systems seat (for a P&H Aries). Used...

Elio Donato Crocetta from Italy

What model Shrike did you choose? Shrike What modifications, if any, did you make to the design described in the Build Manual? Il progetto è stato rispettato ma, puntando a realizzare un’imbarcazione più solida e durevole, si è voluto utilizzare pannelli di compensato...

Fiona from UK

What model Shrike did you choose? 90% Shrike LV with keyhole cockpit

Peter Palmer from Sweden

What model Shrike did you choose? Shrike too What modifications, if any, did you make to the design described in the Build Manual? I made the topside panels 30 mm lower. I have also used fiberglass on the inside and outside. I have a different deck layout. I have also...

Richard Bracey from UK

What model Shrike did you choose? Shrike Too What modifications, if any, did you make to the design described in the Build Manual? This Shrike was fitted with a karitek skeg, 2x 8" rubber Kajak Sport hatches and a 6"rubber day hatch and ocean cockpit. Additional Notes...

Rob from Netherlands

What model Shrike did you choose? Shrike Too / LV (scaled down to 95%). What modifications, if any, did you make to the design described in the Build Manual? - Replaced most of the 50mm 175g/m² glass tape with 204g/m² carbon tape. Not cheap but added strength and...

Page 5 of 7« First...34567

Pin It on Pinterest

Share This